F.A.Q.'s Open All / Close All

I am not familiar with this type of Presta head. How do I use it?

Just push the head onto the valve as far as it goes. Schrader valves and threadless Presta valves may fall back into the rim when the tire is empty. Push on the tire side under the valve to keep it sticking out. The head should require a firm push.

Is it safe to use an air compressor with bicycle tires?

Your concern is exactly what Prestaflator was designed for. The Prestaflator offers a unique variable-rate trigger valve. A partial squeeze on the trigger flows less air. Doing this permits small additions to the tire.

Why is the head sometimes hard to remove from the tire valve?

Use the pressure release button to let the air out of the tool before you try to pull off the head.  Pressure inside the tool tightens the gasket during inflation.  If you still find it difficult, moisten or lubricate the grommet. Any standard non-wax liquid chain lube works well.

How does it work for Schrader valves?

The small head screws onto the valve. This attachment method is safe at high pressures. A rubber o-ring inside provides a leak-free seal so you can accurately regulate high inflation pressures.

Are there different kinds of Presta valves?

Presta Valves (also known as French valves) are standard. The greatest variation is whether or not the body is threaded for a hold-down nut. The Head used on the Prestaflator fits all types of Presta valves. The head maintains contact by friction with a rubber grommet.
Read more here.

What if I find the Head Grommet has worn? Can you provide a replacement?

Experience has shown that the grommet lasts for years. It is a standard wear item available from your Local Bike Shop and is so inexpensive you may want to add a spare to your next bicycle supplies purchase. You will find it sold as "24.1 Pump Head Washer".

Air Compressors

Please visit our Compressors Page for our evaluations and recommendations.

Dealer / Distributor Inquiries

The Prestaflator Company welcomes and services Bicycle Dealers and Distributors. We believe in the Local Bike Shop as the cyclist's most valuable resource, and feel it is the heart and soul of the cycling industry. You will find our industry-standard sales and support a valuable asset to your cycling business.

Dealers are invited to join us.
Please inquire at sales@prestaflator.com

Contact

Send all purchasing inquiries to: sales@prestaflator.com

Already have one of our products?
Please send inquiries to: cs@prestaflator.com

Warranty

Prestaflator warrants all new products manufactured by Prestaflator to be free of defective material or workmanship for 90 days, and under the conditions stated herein. This warranty is expressly limited to repair or replacement of product found to be defective. Prestaflator assumes no liability for loss due to failure of any product to perform satisfactorily. Prestaflator makes no other warranty, expressed or implied, except that of title. Any and all other warranties are expressly disclaimed.

This warranty applies under conditions of intended use and is exclusive of equipment subjected to: Failure to follow recommended assembly and service procedures, Lack of proper maintenance, excessive duty cycle, exposure to the elements, shipping damage and modification not authorized by Prestaflator. No warranty claims will be honored without prior authorization for repair from Prestaflator. Any replaced or repaired equipment will be warranted for the remainder of the warranty term only.

Disclaimers

Air compressor and air hose with quick release connector required for use - not included.
Maximum air pressure is limited by your compressor's capabilities.
Item for sale is exactly as pictured. No additional items included.