Buy it now
Purchasing
Click here for our Dealer Locator!
Prestaflator products are sold and serviced through our Dealer Network of Local Bike Shops. You bike shop can provide you the best options for sales, service and instruction of Prestaflator products. If your LBS doesn't carry Prestaflator yet, tell them about it! - If you don't have a local dealer, on-line purchasing is available below.
Prestaflator Air Compressor Bicycle Inflator Tool
Accessories
Buy it now
$9.95
Quick Clip Schrader Head
Heavy duty quick-clip Schrader head for frequent Schrader use. Our oversized spring stands-up to high bicycle pressure for a good seal and safety. The compact angle head goes where even floor pump heads can't reach, like kids bikes and small scooter tires!
Patent Pending 2-way connector. Screw it onto the Prestaflator threaded connector or directly clamp it to a hose. It has a 5/16" taper that will fit most hoses between 1/4" and 3/8" inner diameter.
Buy it now
$4.95
Safety Blower / Low Pressure Inflator Tip
Allows you to reach into difficult places with your Prestaflator hose. Great for cleaning and drying parts
on-or-off the bike. If the tip is blocked, The safety feature releases air out the back of the Prestaflator Schrader head (away from your work) so you can maintain control.
Your Prestaflator can also be used with this tip to inflate low pressure vinyl-valve items (beach-ball type). The safety release feature will help prevent over-inflation.
Note: The safety feature is only functional when the tip is used on a Prestaflator.
Buy it now
$13.95
Silca 25.0 Disc Wheel Head
For Disc wheels with Presta valves, the Silca 25.0 head works perfectly on your Prestaflator. A small head and right angle arm make it easy to access tight places. It's also compatible with Silca Pumps and can be adapted to other pump brands with our optional Schrader barb.
Made fully from Aluminum. It's strong, corrosion proof and trouble-free. Note: We recommend our standard head for everyday bike wheels and/or high volume use.
Buy it now
$7.95
Brass 1/4" I/M Coupler Kit
We've got access to commercial grade components, so why not pass that along? Add one or two of these kits to your order and it won't increase the shipping cost. One stop shopping and Prestaflator-approved components. Much better quality than most of the units included free with an air compressor or air tool set.
All-brass with stainless steel bearings. Will not rust or corrode. Kit includes coupler, three male plugs and one female plug.
Parts & Upgrades
Buy it now
$9.95
Replacement Presta Head
EZ-Grip brass head for durability and long life without corrosion. No mechanisms or moving parts to break. Push on / pull off - the fastest way to get you going.
Patent Pending 2-way connector. Screw it onto the Prestaflator threaded connector or directly clamp it to a hose. It has a 5/16" taper that will fit most hoses between 1/4" and 3/8" inner diameter.
For use on Prestaflator or to upgrade/replace floor pump heads. Compatible with industry standard 24.1 pump head washer (available in our kit below).
Buy it now
$5.95
Upgrade / Repair Presta Head
Upgrade your older brass head to EZ-Grip. Makes it much easier and safer for quick push-on / pull off use. Also great for repairing plastic Silca pump heads. Just keep the good parts from your old head and throw away the plastic.
Does not include screw cap or rubber grommet. If you need these parts you should buy the complete replacement Presta head shown above.
Buy it now
$4.95
Prestaflator Schrader Hose Barb
Upgrade your floor pump to Prestaflator heads and accessories. Two sizes available:
Standard 1/4" - fits 1/4" inner diameter hose.
Small 5/32" - fits most 1/8" to 3/16" inner diameter hose.
(This is the same size as the one on a Silca pump hose)
Hose clamp not included. The correct hose clamp varies based upon the outer diameter of your pump's hose.
Buy it now
$3.95
Prestaflator Rebuild Kit
Get a fresh seal in your Prestaflator or pump head, or renew all the seals in your Prestaflator tool.
Includes our improved 24.1 compatible pump head washer. We use a softer rubber. It's easier to get on and off, provides a better seal and lasts longer because it flexes instead of flaking-off onto your valve. Kit also includes three (3) #7 o-rings made from high quality buna-nitrile (BN70) rubber with a durometer rating of 70. These o-rings fit the hose and other removable connectors on a Prestaflator tool.
Buy it now
$12.95
Prestaflator Replacement Hose
Upgrade or replace your hose! Our 2009 hose uses the latest technology: Braid-Reinforced Polyurethane. Superior to Rubber or PVC, it's more flexible, non-marring, and is resistant to moisture, fungi, oil, fuel, and grease as well as abrasion, impact, and tearing. Operating temperature range is from -90° to +175°F.
The gloss black finish conceals dirt, grime and grease and will simply wipe clean. Fits all previous Prestaflator tools, o-ring included. Note: Will only fit Prestaflator tools.
Thank You from a repeat customer! They work great and make great gifts!
~ Devon Reiss
Payment
We use PayPal as our Credit Card processor. It does not require any sign-up, registration or membership. We feel PayPal offers a Higher level of security than other credit card processors.
With most credit card processors, three (3) parties see your credit card number: You, the Bank and the Seller. PayPal takes the transaction from you directly. Once PayPal receives your payment, they send a separate transaction from them to the Seller. This means your credit card number is never exposed to the selling company's employees or stored on their computer systems. Of course you can trust everyone here at Prestaflator. We just think it's even better for us to be able to say we've never even seen a single customer's credit card number.
What a great item. Takes all the guesswork and difficulty away.
~ Tom Adams
Shipping & Handling
Shipping is provided using fast, inexpensive USPS Priority Mail or USPS Priority International service. Shipping and handling fees are set as close as possible to the exact costs of shipping plus transaction fees.